NEC SL1000 - Page 172

Transfer
Calls cannot be transferred to the Remote Conference session.
Guide to Feature Programming
Program Num-
ber
Program Name Default
11-19-01 Remote Conference Pilot Number Setup - Maximum Channels Refer to Programming Manual.
14-01-02 Basic Trunk Data Setup - Transmit Level 32 (0dB)
14-01-03 Basic Trunk Data Setup - Receive Level 32 (0dB)
14-01-04 Basic Trunk Data Setup - Transmit Gain Level for Conference
and Transfer Calls
32 (0dB)
14-01-05 Basic Trunk Data Setup - Receive Gain Level for Conference
and Transfer Calls
16 (-8dB)
14-02-09 Analog Trunk Data Setup - Busy Tone Detection 0
20-13-46 Class of Service Options (Supplementary Service) - Remote
Conference
COS 01~15 = 1
20-34-01 Remote Conference Group Setup - Conference Name Group1 - Conf 1
Group2 - Conf 2
Group3 - Conf 3
Group4 - Conf 4
20-34-02 Remote Conference Group Setup - Password Group1 - 1111
Group2 - 2222
Group3 - 3333
Group4 - 4444
20-34-03 Remote Conference Group Setup - Maximum Participants 8
20-34-04 Remote Conference Group Setup - Maximum Conference Dura-
tion
7200
20-34-05 Remote Conference Group Setup - End Tone Alert Time 300
Operation
To joining a Remote Conference Call:
1. Internal Extension:
Lift the handset and dial the extension number of the Remote Conference pilot number (assigned
in PRG 11-19-01).
- OR -
External Party:
Dial the telephone number for the Remote Conference pilot number (assigned in PRG 11-19- 01).
• When using a subaddress, dial the Remote Conference pilot number as the Subaddress
2. The password is requested by the VRS (Password please).
3. Dial the password of the conference group.
4. If the password matches, the participant becomes part of the Remote Conference.
If the password does not match, a warning tone is heard.
• A busy tone will also be heard if the maximum number of Remote Conference participants has
been reached or if a conference resource cannot be secured.
• As the maximum time for the conference nears, the system will provide an end tone to the
participants according to the timer in PRG 20-34-05. Once this timer expires, if the conference
is still ongoing, the call will be disconnected by the system.
SL1000/SL1100
ISSUE 2.0
1-162
Conference, Remote
C