Operation
To use Dial Number Preview to place a call (Multiline Terminal only) (When set PRG
15-02-60:0)
1. Do not lift the handset or press Speaker key.
2. To preview any number, press
key and dial the number you wish to call.
With the VRS key installed, you must dial
to preview the number.
To preview a Speed Dial - System/Group number, press the Left Cursor key and dial the Speed
Dial - System/Group bin number you want to call.
The number is displayed.
3. To dial out the displayed trunk number, press a Line/Trunk Group key.
If the previewed number as a trunk access code (e.g., 9), you can press Speaker key instead.
- OR -
To dial an Intercom number, press Speaker key.
- OR -
To cancel the number without dialing it out, press Hold key.
To use Dial Number Preview to place a call by Directory Dialing (Multiline Terminal
only) (When set PRG 15-02-60: 1 or 2)
1. Do not lift the handset or press Speaker key.
2. To preview any number, press
key and dial the number you wish to call.
- OR -
To preview a Speed Dial - System/Group number,
1.
Press Down Cursor key and press 1
st
character you want to search.
2. Press Up Cursor key or Down Cursor key to select the destination name.
3. Press Enter Cursor key to confirm a name and number.
The number and name is displayed.
3. To dial out the displayed trunk number, press a Line/Trunk Group key.
If the previewed number as a trunk access code (e.g.,9), you can press Speaker key instead.
- OR -
To dial an Intercom number, press Speaker key.
- OR -
To cancel the number without dialing it out, press Hold key.
SL1000/SL1100
ISSUE 2.0
1-192
Dialing Number Preview
D
To Next Page
Loading...
