NEC SL1000 - Page 25

Guide to Feature Programming
Program Num-
ber
Program Name Default
14-01-11 Basic Trunk Data Setup - Account Code Required 1
15-07-01 Programmable Function Keys
Account Code Key (code 50)
Refer to Programming Manual.
20-06-01 Class of Service for Extensions All extension port = Class 1
20-13-20 Class of Service Options (Supplementary Service) - Account
Code/Toll Restriction Operator Alert (Restricted Operation
Transfer)
COS 01~15 = 1
21-01-14 System Options for Outgoing Calls - Forced Account Code In-
ter-digit Timer
3 (seconds)
21-04-01 Toll Restriction Class for Extensions 2
21-24-01 Forced Access Dialing - Emergency Number No setting
35-05-01 Account Code Setup - Account Code Mode 0
35-05-02 Account Code Setup - Forced Account Code Toll Call Setup 0
35-05-03 Account Code Setup - Account Codes for Incoming Calls 0
35-05-04 Account Code Setup - Hiding Account Codes 0
35-06-01 Verified Account Code Table - Verified Account Code No setting
40-10-01 Voice Announcement Service Option - VRS Fixed Message 1
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also be able to use this procedure for
incoming calls. This procedure is not available for Single Line Terminals.
1. Dial
*
.
- OR -
Press your Account Code key (PRG 15-07-01 or SC 851: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial shows an “
*
” character on the telephone display.
3. Dial
*
.
- OR -
Press your Account Code key (PRG 15-07-01 or SC 851: code 50).
To enter a Forced Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting
the system prompt you for your Account Code. You may also use this procedure if your system has
Optional Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-15
A