Program
Number
Program Name Default Note
11-10-23 Service Code Setup (for System Administrator) -
SMDR - Extension Accumulated Printout Code
721
11-10-24 Service Code Setup (for System Administrator) -
SMDR - Group Accumulated Printout Code
722
11-10-25 Service Code Setup (for System Administrator) - Ac-
count Code Accumulated Printout Code
723
11-10-26 Service Code Setup (for System Administrator) -
Forced Trunk Disconnect
724
11-10-27 Service Code Setup (for System Administrator) -
Trunk Port Disable for Outgoing Calls
745
11-10-32 Service Code Setup (for System Administrator) - Set
Private Call Refuse
746
11-10-33 Service Code Setup (for System Administrator) - En-
try Caller ID Refuse
747
11-10-34 Service Code Setup (for System Administrator) - Set
Caller ID Refuse
748
11-10-35 Service Code Setup (for System Administrator) - Di-
al-In Mode Switching
709
11-10-41 Date Setting 789
11-10-42 Maintenance Service 743
11-10-43 VRS Incoming 878
11-10-44 Cutting the telephone power
Sets the Service Code for power cutting. (for Administra-
tor)
PRG 11-10-44 Input dial is Max 4 (SL1000) 8 (SL1100)
digits.
831
11-10-45 Room Monitor Permit
Sets Service Code (SC) for Room monitor on/off to ter-
minal.
SC+1+Extension Number ; Room Monitor enable
SC+0+Extension Number ; Room Monitor disable
710
11-10-46 Watch Message Setting
Service Code setting for Watching message recording to
VRS
714
11-10-47 Warning Message Setting
Service Code setting for Warning message recording to
VRS.
715
11-10-48 Auto Dial Setting for Security Sensor
Service Code setting for destination number when Warn-
ing mode detected.
717
11-10-49 Auto Dial Setting for Remote Inspection
Service Code setting for destination number when re-
mote inspection detects no answer
719
11-10-50 Night-mode Skip (Own Group) 787
11-11-01 Service Code Setup (for Setup/Entry Operation) -
Call Forward - All
848
11-11-02 Service Code Setup (for Setup/Entry Operation) -
Call Forward - Busy
#1
11-11-03 Service Code Setup (for Setup/Entry Operation) -
Call Forward - No Answer
845
11-11-04 Service Code Setup (for Setup/Entry Operation) -
Call Forward - Busy/No Answer
844
11-11-05 Service Code Setup (for Setup/Entry Operation) -
Call Forward - Both Ring
842
SL1000/SL1100 ISSUE 2.0
1-252
Flexible System Numbering
F
To Next Page
Loading...
