NEC SL1000 - Page 274

Program Number Program Name Default
21-01-18 System Options for Outgoing Calls - Reset Dial After
Failure of Trunk Access
Set to 0 (on) for Forced Trunk Disconnect to work.
0: Enable
Operation
To disconnect a busy trunk:
Multiline Terminal
1. Press a line key for trunk.
- OR -
Dial trunk access code (#0 + trunk number).
You hear busy tone. Trunk numbers are 001~126 (SL1000) 001~096 (SL1100).
2. Dial the Service Code (724).
You hear confirmation beeps as the system disconnects the trunk.
You can now place a call on the free trunk.
3. Press the line key for the trunk disconnected in step 2.
- OR -
Dial the trunk access code (#0 + trunk number) for the trunk disconnected in step 2.
Single Line Terminal
1. Dial trunk access code (#0 + trunk number).
You hear busy tone. Trunk numbers are 001~126 (SL1000) 001~096 (SL1100).
2. Dial Service Code (724).
You hear confirmation beeps as the system disconnects the line.
3. Hookflash.
You can now place a call on the free line.
4. Dial the trunk access code (#0 + trunk number) for the trunk disconnected in step 2.
SL1000/SL1100 ISSUE 2.0
1-264
Forced Trunk Disconnect
F