NEC SL1000 - Page 29

System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Automatic Route Selection (ARS/F-Route)
One-Touch Calling
PBX Compatibility/Behind PBX
Station Message Detail Recording
Guide to Feature Programming
Program Num-
ber
Program Name Default
14-01-11 Basic Trunk Data Setup - Account Code Required 1
15-07-01 Programmable Function Keys
Account Code key (code 50)
Refer to Programming Manual.
20-06-01 Class of Service for Extensions All extension port = Class 1
21-01-04 System Options for Outgoing Calls - Dial Tone Detection
Time
5 (seconds)
35-05-01 Account Code Setup - Account Code Mode 0
35-05-02 Account Code Setup - Forced Account Code Toll Call Setup 0
35-05-03 Account Code Setup - Account Codes for Incoming Calls 0
35-05-04 Account Code Setup - Hiding Account Codes 0
35-06-01 SMDR Account Code Setup - Verified Account Code No setting
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also be able to use this procedure for
incoming calls. This procedure is not available for Single Line Terminals.
1. Dial
*
.
- OR -
Press your Account Code key (PRG 15-07 or SC 851: code 50).
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-19
A