NEC SL1000 - Page 336

Intercom
Voice Response System (VRS)
Guide to Feature Programming
Program Num-
ber
Program Name Default
20-06-01 Class of Service for Extensions All extension port = Class 1
20-08-20 Class of Service Options (Outgoing Call Service) - Hot
Key Pad
COS 01~15 = 0
Operation
To place an intercom call using Hot Key-Pad:
The Multiline Terminal is idle. No need to press Speaker key.
1. Dial the extension.
2. Dialed extension rings.
To place a trunk call using Hot Key-Pad:
The Multiline Terminal is idle. No need to press Speaker key.
1. Dial the trunk access code, 0 by default, and the external destination number you wish to call.
SL1000/SL1100 ISSUE 2.0
1-326
Hot Key-Pad
H