NEC SL1000 - Page 37

System Information Date
slot location type assign port condition note
COIU 17–20 Running Slot 9 : Information of EXIFE2 (408M :
SUB SLOT (COI))
HBIU 25–32 Running Slot 9 : Information of EXIFE2 (408M :
SUB SLOT (HBI))
-none- -none- Not Install Slot 9 : Information of EXIFE2 (408M :
SUB SLOT 2 (HBI))
*1
10 3–2 -none- -none- Not Install Slot 10 : Information of EXIFE2 (Slot
2 : 408E/008E/000E)
11 3–3 008E -none- Running Slot 11 : Information of EXIFE2 (Slot
3 : 408E/008E/000E)
HBIU 33–40 Running Slot 11 : Information of EXIFE2 (Slot
3 : 008E : SLOT (HBI))
-none- -none- Not Install Slot 11 : Information of EXIFE2 (Slot
3 : 008E : SLOT2 (HBI))
*1
12 3–4 -none- -none- Not Install Slot 12 : Information of EXIFE2 (Slot
4 : 408E/008E/000E)
10 3–2 BRIU 21–24 Running Slot 10 : Information of EXIFE2 (Slot
2 : BRI/PRI)
11 3–3 -none- -none- Not Install Slot 11 : Information of EXIFE2 (Slot
3 : BRI/PRI)
12 3–4 -none- -none- Not Install Slot 12 : Information of EXIFE2 (Slot
4 : BRI/PRI)
13 4–1 408M -none- Running Slot 13 : Information of EXIFE3 (408M)
-none- -none- Not Install Slot 13 : Information of EXIFE3
(408M : SUB SLOT (COI))
*4
HBIU 41–48 Running Slot 13 : Information of EXIFE3
(408M : SUB SLOT (HBI))
-none- -none- Not Install Slot 13 : Information of EXIFE3
(408M : SUB SLOT (HBI))
*1
14 4–2 -none- -none- Not Install Slot 14 : Information of EXIFE3 (Slot
2 : 408E/008E/000E)
15 4–3 -none- -none- Not Install Slot 15 : Information of EXIFE3 (Slot
3 : 408E/008E/000E)
16 4–4 -none- -none- Not Install Slot 16 : Information of EXIFE3 (Slot
4 : 408E/008E/000E)
1. HBIU control both SLT and KST in same package. Since one unit control both SLT and KST it will
show same information for each. Since it shows same information one of unit will show as "None".
2. Shows 000E as “-none-”. (SL1000)
3. Shows 408M/408E/008E and PRI/BRI as different output. (SL1000)
4. Shows 084M/080E/008E and PRI/BRI as different output. (SL1100)
5. COIU of Expansion3 has a restriction and it will show as “-none-”. (SL1000)
Conditions
• Alarm Reports and System Information Reports can be output to a CF card on the CPU.
• The supports the following Alarms to be output to the LCD of a Multiline Terminal:
- SMDR Buffer Full
- CPU-LAN link Error
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-27
A