NEC SL1000 - Page 40

E-mailing Alarm Reports:
Program
Number
Program Name Default Note
10-12-01 CPU Network Setup - IP Address 192.168.0.10
10-12-02 CPU Network Setup - Subnet Mask 255.255.255.0
10-12-03 CPU Network Setup - Default Gateway 0.0.0.0
90-11-02 System Alarm Report - Report Method 0
90-11-06 System Alarm Report - SMTP Host Name No setting
90-11-07 System Alarm Report - SMTP Host Port Number 25
90-11-08 System Alarm Report - To Email Address No setting
90-11-09 System Alarm Report - Reply Address No setting
90-11-10 System Alarm Report - From Address No setting
90-11-11 System Alarm Report - DNS Primary Address 0.0.0.0
90-11-12 System Alarm Report - DNS Secondary Address 0.0.0.0
90-11-13 System Alarm Report - Customer Name No setting
90-11-14 System Alarm Report - Change SMTP Client 0 (V2.0 Added)
90-11-15 System Alarm Report - DIMLOG Notification 0 (V2.0 Added)
90-25-01 System Alarm Report CC Mail Setup - CC Mail Address No setting
InMail SMTP Setup: (V2.0 Added)
Program
Number
Program Name Description/Comments Assigned Data
47-18-01 InMail SMTP Setup - SMTP
Enabled
Enables the SMTP forwarding feature for
the system.
0 = Off
1 = On
(default = 0)
47-18-02 InMail SMTP Setup - Server
Name
Sets the SMTP server name. If the DNS
server setting is not assigned in Program
90-11-11, the IP Address must be used in-
stead of the name.
Up to 48 characters
(default = No Setting)
47-18-03 InMail SMTP Setup - SMTP
Port
Sets the SMTP server port. 0~65535
(default = 25)
47-18-04 InMail SMTP Setup - Encryp-
tion
Enable SSL Encryption. 0 = Off
1 = On
(default = 0)
47-18-05 InMail SMTP Setup - Authenti-
cation
Enables authentication, when set to 2
(POP3) refer to PRG 47-19-xx.
0 = Off
1 = On
3 = POP3
(default = 0)
47-18-06 InMail SMTP Setup - User
Name
Set the user name for SMTP authentica-
tion.
Up to 48 characters
(default = No Setting)
47-18-07 InMail SMTP Setup - Pass-
word
Set the password for SMTP authentica-
tion.
Up to 48 characters
(default = No Setting)
47-18-08 InMail SMTP Setup - E-mail
Address
Set the email address for the system. This
is the “from address” for outgoing emails.
Up to 48 characters
(default = No Setting)
47-18-09 InMail SMTP Setup - Reply to
Address
Set the email address for replies to outgo-
ing emails. This email account is not
monitored by the system and must be
checked manually.
Up to 48 characters
(default = No Setting)
SL1000/SL1100 ISSUE 2.0
1-30
Alarm Reports
A