NEC SL1000 - Page 406

Required Component(s)
None
Related Features
Handsfree Answerback/Forced Intercom Ringing
Intercom
Line Preference
Name Storing
Guide to Feature Programming
Program
Number
Program Name Default Note
11-11-13 Service Code Setup (for Setup/Entry Operation) - Dis-
play Language Selection for Multiline Terminal
778
15-01-13 Extension Basic Data Setup - Special ring tone choice 0 = Incoming extension ring tone
(SL1000)
1 = Tone pattern 1 (SL1000)
2 = Tone pattern 2 (SL1000)
3 = Tone pattern 3 (SL1000)
4 = Tone pattern 4 (SL1000)
5 = Tone pattern 5 (DR300) /
Melody1 (DR700) (SL1000)
6 = Tone pattern 6 (DR300) /
Melody2 (DR700) (SL1000)
7 = Tone pattern 7 (DR300) /
Melody3 (DR700) (SL1000)
0 = Incoming extension ring tone
(SL1100)
1 = Tone pattern 1 (SL1100)
2 = Tone pattern 2 (SL1100)
3 = Tone pattern 3 (SL1100)
4 = Tone pattern 4 (SL1100)
(default = 0)
(V2.0 Added)
15-02-01 Multiline Telephone Basic Data Setup - Display Lan-
guage Selection
1
20-06-01 Class of Service for Extensions All extension port = Class 1
20-08-01 Class of Service Options (Outgoing Call Service) - In-
tercom Calls
COS 01~15 = 1
20-08-11 Class of Service Options (Outgoing Call Service) - Pro-
tect for the Call Mode Switching from Caller
COS 01~15 = 0
20-11-07 Class of Service Options (Hold/Transfer Service) -
Transfer Without Holding
COS 01~15 = 0
20-13-22 Class of Service Options (Supplementary Service) -
Busy Status Display (Called Party Status)
COS 01~15 = 0
20-17-01 Operator Extension - Operator’s Extension Number 200
20-18-01 Service Tone Timers - Extension Dial Tone Time 120 (seconds)
21-01-02 System Options for Outgoing Calls - Intercom Interdi-
git Time
10 (seconds)
SL1000/SL1100 ISSUE 2.0
1-396
Intercom
I