Feature Name Standard SIP Comments Note
Programming from a Multiline Termi-
nal
No
Pulse to Tone Conversion No
Redial Function No Call Redial Function is a function of the client de-
vice and not the system.
Repeat Redial No
Reverse Voice Over No (SL1100)
Ring Groups Yes
Ringdown Extension (Hotline), Inter-
nal/External
Yes A SIP device can be a ring down destination but
cannot originate a ring down call.
Room Monitor No
Save Number Dialed No
Secondary Incoming Extension No
Secretary Call (Buzzer) No
Secretary Call Pickup No
Selectable Display Messaging No
Selectable Ring Tones Yes Selectable Ring Tones is a function of the client
device.
Serial Call No
Single Line Terminals No
Softkeys No (SL1100)
Station Hunt No
Station Message Detail Recording Yes
Station Name Assignment - User
Programmable
No
Station Relocation No
Tandem Ringing No
Tandem Trunking (Unsupervised
Conference)
No
Tone Override No
Traffic Reports No
Transfer Yes Transferred calls cannot be pulled back once
transfer is initiated.
Trunk Group Routing Yes
Trunk Groups Yes
Trunk Queuing/Camp-On
Uniform Call Distribution (UCD) No
User Programming Ability
Virtual Extensions No Limited user customization available.
Voice Mail Integration (Analog) Yes
Voice Over Yes By nature, this is a SIP device. (SL1100)
Voice Over No (SL1100)
Voice Response System (VRS) -
Call Forwarding – Park and Page
Yes
Volume Controls Yes Volume control is a function of the client device.
Wireless Dect (SIP) No (SL1100)
SL1000/SL1100 ISSUE 2.0
1-412
IP Single Line Terminal (SIP)
I
To Next Page
Loading...
