NEC SL1000 - Page 425

Program Num-
ber
Program Name Default
84-19-39 SIP Extension IP CODEC Information Basic Setup - G.726
Voice Activity Detection Mode
0
84-19-40 SIP Extension IP CODEC Information Basic Setup - G.726
Jitter Buffer (min)
30 (ms)
84-19-41 SIP Extension IP CODEC Information Basic Setup - G.726
Jitter Buffer (Average)
60 (ms)
84-19-42 SIP Extension IP CODEC Information Basic Setup - G.726
Jitter Buffer (Max)
120 (ms)
84-19-49 RTP Filter 1
84-19-50 Fax Relay mode 0
84-19-51 T.38 Protocol mode 1
84-19-52 Fax Max Rate 5
84-19-56 Low Speed Data Redundancy 0
84-19-57 High Speed Data Redundancy 0
84-19-58 TCF Handling 1
84-19-61 T.38 RTP Format Payload Number 100
SIP Extension Basic Information Setup:
Program Num-
ber
Program Name Default
84-20-01 SIP Extension Basic Information Setup - Registrar/Proxy
Port
5070
84-20-02 SIP Extension Basic Information Setup - Session Timer
Value
180 (seconds)
84-20-03 SIP Extension Basic Information Setup - Minimum Session
Timer Value
180 (seconds)
84-20-04 SIP Extension Basic Information Setup - Called Party Info 0
84-20-05 SIP Extension Basic Information Setup - Expire Value of
Invite
180 (seconds)
84-26-01 IPL Basic Setup - IP Address 172.16.0.20
84-26-02 IPL Basic Setup - RTP Port Number VoIP GW1 = 10020
84-26-03 IPL Basic Setup - RTCP Port Number (RTP Port Number +
1)
VoIP GW1 = 10021
IP Terminal Configuration:
Program Num-
ber
Program Name Default
15-01-01 Basic Extension Data Setup - Extension Name STA 200 ~ 327 = No setting
15-05-02 IP Telephone Terminal Basic Data Setup - IP
Phone Fixed Port Assignment
00-00-00-00-00-00
15-05-07 IP Telephone Terminal Basic Data Setup - Using
IP Address
0.0.0.0
15-05-15 IP Telephone Terminal Basic Data Setup - CO-
DEC Type
1 (Type 1)
15-05-16 Authentication Password None
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-415
I