NEC SL1000 - Page 430

System Availability
Terminals
All Multiline Terminals
Required Component(s)
SL-IP-SIPTRK-1-LIC (License Code 5001)
CPU with VoIPDB installed
Related Features
None
Guide to Feature Programming
Program
Number
Program Name Default Note
10-02-01 Location Setup - Country Code None (V2.0 Added)
10-02-02 Location Setup - Internal Access Code 00 (V2.0 Added)
10-02-03 Location Setup - Other Area Access Code 0 (V2.0 Added)
10-12-03 CPU Network Setup - Default Gateway 0.0.0.0
10-12-05 CPU Network Setup - NIC Interface 0
10-12-06 Network Address Port Translation - (NAPT) Router Setup 0
10-12-07 Network Address Port Translation - NAPT Router IP Address
(Default Gateway [WAN])
0.0.0.0
10-12-08 Network Address Port Translation - ICMP Redirect 0
10-12-09 CPU Network Setup - IP Address 172.16.0.10
10-12-10 CPU Network Setup - Subnet Mask 255.255.0.0
10-12-11 CPU Network Setup - NIC Setup 0
10-19-01 VoIP DSP Resource Selection Resource = 0
10-23-01 SIP System Interconnection Setup - System Interconnection 0
10-23-02 SIP System Interconnection Setup - IP Address 0.0.0.0
10-23-04 SIP System Interconnection Setup - Dial Number Not Set
10-28-01 SIP System Information Setup - Domain Name None
10-28-02 SIP System Information Setup - Host Name None
10-28-03 SIP System Information Setup - Transport Protocol 0
10-28-04 SIP System Information Setup - UserID None
10-28-05 SIP System Information Setup - Domain Assignment 0
10-28-06 SIP System Information Setup - IP Trunk Port Binding 0
10-29-01 SIP Server Information Setup - Default Proxy (Outbound) 0
10-29-02 SIP Server Information Setup - Default Proxy (Inbound) 0
10-29-03 SIP Server Information Setup - Default Proxy IP Address 0.0.0.0
SL1000/SL1100 ISSUE 2.0
1-420
IP Trunk - (SIP) Session Initiation Protocol
I