NEC SL1000 - Page 454

Stop
Stop
B
Yes
Yes
No
No
Yes
Yes
Yes
No
Trunks
No
No
No
Is the amount of time the system waits before
placing the call in a talk state sufficient?
Should extension users
have one-button placing
of outside calls?
Should extension users have
one-button access to trunk
groups for placing calls?
Do you want to adjust
the gain (volume) for
trunks?
Check the Analog Trunk Timers in
PRG 81-01 for compatibility with the Telco.
If desired, assign names to
trunks in PRG 14-01-01.
In PRG 11-09-02, assign the
Service Code set up in the
previous step for Altemate
Trunk Route Access.
Do you want to set up
an Altemate Trunk
Route Access Code?
Should extension be
able to use Altemate
Trunk Route Access?
Is Trunk Group
Routing defined?
In PRG 11-01-01, set
up a Service Code for
Altemate Trunk Route
Access.
For example, to make
50 the Altemate Trunk
Route Access Code.
DIAL = 5
Digit = 2
Kind = 8
In PRG 21-15-01, enter
the extension number
and enter 0 to
prevent routing.
In PRG 15-07-01, do not
assign function key as
line keys.
In PRG 21-01-03, enter
the interval for the
trunk interdigit timer.
In PRG 15-07-01, assign
function keys as line keys.
code *01+001-96
In PRG 15-07-01, assign
line group keys (*02).
In PRG 15-07-01, do not
assign Trunk Group
Access or trunk group keys.
Adjust the CODEC Gain
in PRG 14-01-02 (transmit)
and PRG 14-01-03 (receive).
In PRG 21-15-01, enter
the extension number and
enter the Trunk Group
Routing route number.
Refer to the Trunk
Group Routing
feature and set up
Trunk Group
Routing.
(SL1100)
SL1000/SL1100
ISSUE 2.0
1-444
ISDN Compatibility
I