• After answering Callback, if the system does not receive a DTMF signal from the Mobile Extension
using PRG 20-18-01 (Default; 30 seconds), the system disconnects the call.
• The trunk user for SMDR for Callback is tied to the extension number of Mobile Extension.
• If the user calls a Mobile Extension port during while using the Callback to Mobile Phone feature,
the caller hears a busy tone.
Default Setting
No Mobile Extensions are configured.
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Caller ID
Call Forwarding
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Station Message Detail Recording
Guide to Feature Programming
Program Num-
ber
Program Name Default
13-04-01 Speed Dialing Number and Name – Speed Dialing Data No Setting
13-04-03 Speed Dialing Number and Name – Transfer Mode 0
13-04-04 Speed Dialing Number and Name – Transfer Destination Number No Setting
14-01-30 Basic Trunk Data Setup – Flexible Ringing by Caller ID 1
15-22-01 Mobile Extension Setup – Mobile Extension Target Setup 0
15-22-03 Mobile Extension Setup – Trunk Access Code 0
15-22-04 Mobile Extension Setup – Call Back 0
20-01-16 System Options – Mobile Extension Callback Duration Time 15 Seconds
20-31-24 Timer Class Timer Assignment – Answer Time from Mobile Ex-
tension
3 Seconds
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-495
M
To Next Page
Loading...
