6. Press Enter Cursor key to decide the destination.
(SL1000)
Top Left = Caller Name (Number)
Top Right = Number of Missed Call
Bottom = Mode Name
nnnnnnnn x/x
>Calling
Save Private Phonebook
(This display indication is for IP Terminal Only.) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
1st Line = Caller Name (Number) and Number of Missed Call
2nd Line = Mode Name
3rd Line = Next Mode Name
7. Press Down Cursor key. The display shows: (SL1000) Press Down Cursor key to select the
“Save Private Phonebook”. (SL1100)
nnnnnnn xx/xx
>Save Private
(SL1000)
nnnnnnnn x/x
>Save Private Phonebook
Save Common Phonebook
(This display indication is for IP Terminal Only.) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
8. Press Enter Cursor key to check the number.
[MIS/TEL] x/x
>Dial:nnnnnnnn
(SL1000)
Private Phonebook x/x
>Dial:nnnnnnnn
Name:zzzzzzzz
(This display indication is for IP Terminal Only.) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
SL1000/SL1100
ISSUE 2.0
1-514
Navigation Key
N