NEC SL1000 - Page 529

3. Press the Down Cursor key to select “Phone setting”. The display shows:
500:OPRN LST 4/6
>Phone Setting
(SL1000)
500:Operation List 4/6
>Phone Setting
System Setting
(This display indication is for IP Terminal Only.) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
4. Press Enter Cursor key to show Phone Setting mode.
510:Phon SET 1/8
>Not Used
(SL1000)
510:Phone Setting 1/8
>Not Used
Display
(This display indication is for IP Terminal Only.) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
5. Press Up/Down Cursor key to select “Display”.
520:Phon SET 2/8
>Display
(SL1000)
520:Phone Setting 2/8
>Display
Ring Option
(This display indication is for IP Terminal Only.) (SL1000)
(This display indication is for IP and Multiline Terminals.) (SL1100)
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-519
N