NEC SL1000 - Page 536

Program Num-
ber
Program Name Default
14-07-01 Trunk Access Map Setup Access Map 1 = Trunk Ports 1~126 as-
signed with option 7 access (incoming
and outgoing access and access when
trunk is on Hold). (SL1000)
Access Map 2~126 = Trunk Ports
1~126 assigned with option 0 access
(No access). (SL1000)
Access Map 1 = Trunk Ports 1~96 as-
signed with option 7 access (incoming
and outgoing access and access when
trunk is on Hold). (SL1100)
Access Map 2~96 = Trunk Ports 1~96
assigned with option 0 access (No ac-
cess). (SL1100)
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-01-17 Day/Night change key mode 0
20-06-01 Class of Service for Extensions All extension port = Class 1
20-07-01 Class of Service Options (Administrator Level) - Manual
Night Service Enabled
COS 01~15 = 1
20-10-07 Class of Service Options (Answer Service) - Automatic
Off-Hook Answer
COS 01~15 = 1
22-02-01 Incoming Call Trunk Setup 0
22-04-01 Incoming Extension Ring Group Assignment Extension 200 (first port)
22-05-01 Incoming Trunk Ring Group Assignment 1
22-08-01 DIL/IRG No Answer Destination 0
31-05-01 Universal Night Answer/Ring Over Page 0
Operation
To activate Night Service by dialing codes:
1. At a Multiline Terminal, press Speaker key.
- OR-
At the Single Line Terminal, lift the handset.
2. Dial 818. To change a different group’s mode, dial 818 + the group number (01~04).
3. Dial the Night Service Code:
1 = Day 1 Mode
2 = Night 1 Mode
3 = Midnight 1 Mode
4 = Rest 1 Mode
5 = Day 2 Mode
6 = Night 2 Mode
7 = Midnight 2 Mode
8 = Rest 2 Mode
4. Press Speaker key or hang up.
SL1000/SL1100
ISSUE 2.0
1-526
Night Service
N