NEC SL1000 - Page 551

Guide to Feature Programming
Program Number Program Name Default
11-10-20 Service Code Setup (for System Administrator) – VRS - Record/Erase
Message
716
11-12-20 Service Code Setup (for Service Access) – External Paging 803
20-07-13 Class of Service Options (Administrator Level) – VRS Record (VRS
Msg Operation)
COS 1 ~ 15 = 1
Operation
External VRS Messaging
To page into an external zone with VRS message:
1. Pick up the handset or press Speaker key at Multiline Terminal.
2. Dial 803 and
*
then the External Paging Zone code (1-8, 0 for all call).
3. Dial VRS message Number (001-100).
4. Make announcement.
5. Press Speaker key at Multiline Terminal or on-hook.
- OR -
1. Press the DSS/One Touch key programmed for External Paging.
To Program One Touch Key:
The following example shows how to program a One Touch key for External Paging zone 2 to play
VRS greeting number 099.
1. Press Speaker key.
2. Dial 7, 5, 1.
3. Press the Function key to be programmed.
4. Dial 0, 1 (Function Code for the DSS/One Touch key).
5. Dial 7, 0, 3,
*
, 2, 0, 9, 9.
6. Press Hold key.
7. Press Speaker key.
When using the Paging, External (VRS) feature, FC 20 (External All Call Paging code) cannot be
used as a programmable function key.
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-541
P