NEC SL1000 - Page 613

Guide to Feature Programming
Program Num-
ber
Program Name Default
11-12-13 Service Code Setup (for Service Access) - Saved Number
Dial
815
11-12-18 Service Code Setup (for Service Access) - Clear Saved
Number Dialing Data
885
15-07-01 Programmable Function Keys Refer to Programming Manual.
Operation
To save the outside number you just dialed (maximum of 36 digits):
Use this feature before hanging up.
Multiline Terminal
1. Press the Save Number Dialed key (PRG 15-07 or SC 851: 30).
Single Line Terminal
1. Hookflash.
2. Dial 815.
To redial a saved number:
Multiline Terminal
1. Press an idle trunk line key.
This selects a specific trunk for the call.
2. Press the Save Number Dialed key (PRG 15-07 or SC 851: 30).
The stored number dials out.
- OR -
1. Press Speaker key.
2. Dial 815.
- OR -
Press the Save Number Dialed key (PRG 15-07 or SC 851: 30).
Save Number Dialed automatically selects a trunk from the same group as your original call.
The stored number dials out.
Single Line Terminal
1. Go off-hook.
2. Dial 815.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-603
S