NEC SL1000 - Page 616

Virtual Extensions
Guide to Feature Programming
Program Num-
ber
Program Name Default
11-04-01 Virtual Extension Numbering No Setting
15-01-01 Basic Extension Data Setup - Extension Name 200 ~ 327 = No setting (SL1000)
200 ~ 319 = No setting (SL1100)
15-02-07 Multiline Telephone Basic Data Setup - Automatic Hold for
CO lines
1
15-02-21 Multiline Telephone Basic Data Setup - Virtual Extension
Access Mode (When idle Virtual Extension key pressed)
2
15-02-30 Multiline Telephone Basic Data Setup - Toll Restriction
Class
1
15-07-01 Programmable Function Keys Refer to Programming Manual.
15-08-01 Incoming Virtual Extension Ring Tone Setup 0 (Tone Pattern 1)
15-09-01 Virtual Extension Ring Assignment 0
15-10-01 Incoming Virtual Extension Ring Tone Order Setup priority order:
1 = 0 (Tone Pattern 1)
2 = 1 (Tone Pattern 2)
3 = 2 (Tone Pattern 3)
4 = 3 (Tone Pattern 4)
15-11-01 Virtual Extension Delayed Ring Assignment 0
15-18-01 Virtual Extension Key Enhanced Options - Virtual Exten-
sion Key Operation Mode
0
15-18-02 Virtual Extension Key Enhanced Options - Display mode
when placing a call on Virtual Extension Key
0
20-04-03 System Options for Virtual Extensions - CAR/SIE/Virtual
Extension Delay Interval
10 (seconds)
20-06-01 Class of Service for Extensions All extension port = Class 1
20-07-10 Class of Service Options (Administrator Level) - Program-
mable Function Key Programming (Appearance Level)
COS 01~15 = 1
20-10-08 Class of Service Options (Answer Service) - Virtual Exten-
sion Off-Hook Answer
COS 01~15 = 0
20-13-27 Class of Service Options (Supplementary Service) - Busy
on Seizing Virtual Extension
COS 01~15 = 1
21-01-15 System Options for Outgoing Calls - Outgoing Disable on
Incoming Line (Toll Restriction)
0
23-04-01 Ringing Line Preference for Virtual Extensions 0
Operation
To answer a call ringing a SIE key:
1. Press the flashing SIE key.
To program a SIE key on a phone:
1. Press Speaker key.
SL1000/SL1100
ISSUE 2.0
1-606
Secondary Incoming Extension
S