NEC SL1000 - Page 649

Related Features
F-Route
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
10-02-01 Country Code Enter the country code. Dial (up to four digits): 0~9,
*
, #
(default = Not Assigned)
10-02-02 International Access
Code
Enter the international access code. Dial (up to four digits): 0~9,
*
, #
(default = 00)
84-14-13 Incoming/Outgoing SIP
Trunk for E.164
When this data is set to 1, then for any outbound
SIP calls a ‘+’ is added as a prefix to the Request-
URI, To and From header fields of the SIP mes-
sage.
When it is set to 2 then if the dialed international
access code matches the value in PRG 10-02-02
this value is removed from the number dialed and
the ‘+’ added as a prefix to the Request-URI, To
and From header fields of the SIP Message.
0...OFF
1...ON
2…International Access
Mode
(default = 0)
Operation
To make a call using E.164 number format:
1. Pick up the handset or press Speaker.
Dial 00441202223344#.
The system will automatically modify the required header fields of the SIP INVITE message as per the
configuration settings in the table below before then forwarding to the ITSP.
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-639
S