Program Num-
ber
Program Name Default
10-12-09 IP Address
Set or Verify IP for VOIPDB
172.16.0.10
10-12-10 Subnet Mask
Define the Media Gateway Subnet
255.255.0.0
10-20-01 External Equipment – TCP Port
Define the TCP port number for the LAN CTI and O&M com-
munication between the SL1100 and the Desktop Applications.
External Device 1 (CTIServer) = 0
External Device 5 (SMDR Output) = 0
External Device 6 (DIMOutput) = 0
External Device 9 (1st Party CTI) = 8282
External Device
11 (O&M Server) = 8010 External De-
vice
12 (Traffic Report Output)= 0 External
Device
13 (Room Data Output for Hotel Serv-
ice ) = 0
(SL1100)
10-46-01 DR700 Server Information Setup – Register Mode
If set to 0, when the phone boots up it reports the ext. assigned
in the phone or chooses the next available extension in the
system. No password is required. If set 1 the SIP user name
and password must be entered on the actual IP phone. These
settings must match 84-22/15-05-27, or the phone does not
come on-line. If set to 2, when the phone boots up it prompts
user to enter a user ID and password before logging in. It
checks this user ID/password against 84-22/15-05-27. If there
is no match, the phone does not come on-line.
0
15-05-27 IP Telephone Terminal Basic Data Setup – Personal ID In-
dex
When the SIP Multiline telephone is using manual/auto regis-
tration, assign each phone a unique personal index. Then go to
command 84-22 to assign the user name and password.
0
15-05-28 IP Telephone Terminal Basic Data Setup – Addition Infor-
mation Setup
Set Talking Party to 0 for Desktop Application Softphone
0
15-07-01 Programmable Function Keys
Assign a function key to terminals
Refer to Programming Manual
30-01-01 DSS Console Operating Mode
Set the DSS system Console mode.
0
30-02-01 DSS Console Extension Assignment – Extension Number
Set the extension number for the multiline terminal connected
with the DSS console (up to eight digits).
No Setting
30-03-01 DSS Console Key Assignment
For DSS Console Chaining, assign a Speed Dialing Service
Code (or) plus a 2-digit bin number to a DSS Console key.
Refer to Programming Manual
84-20-02 SIP Extension Basic Information Setup – Session Timer
Value
Define the periodic refresh time that allows both user agents
and proxies to determine if the SIP session is still active.
180
84-20-03 SIP Extension Basic Information Setup – Minimum Ses-
sion Timer Value
Define to convey the minimum allowed value for the SIP ses-
sion timer.
180
84-22-01 DR700 Multiline Logon Information Setup – User ID
Input the User ID for each Personal ID Index (1-128 (SL1000)
1-120 (SL1100)) when using auto or manual registration in
10-46-01.
No Setting
84-22-02 DR700 Multiline Logon Information Setup – Password
Input the Password for each Personal ID Index (1-128
(SL1000) 1-120 (SL1100)) when using auto or manual registra-
tion in 10-46-01.
No Setting
SL1000/SL1100 ISSUE 2.0
1-644
SL Desktop Suite
S
To Next Page
Loading...
