NEC SL1000 - Page 686

Slave Telephone:
Single Line Terminals
Required Component(s)
None
Related Features
Call Forwarding
Call Forwarding/Do Not Disturb Override
Direct Station Selection (DSS) Console
Do Not Disturb (DND)
Hold
Intercom
Message Waiting
Ring Groups
Multiple Trunk Types
Guide to Feature Programming
Program Number Program Name Default
11-11-41 Service Code Setup (for Setup/Entry Op-
eration) - Tandem Ringing
744
15-07-01 Programmable Function Keys Refer to Programming Manual.
30-03-01 DSS Console Key Assignment The DSS keys 001~060 of all DSS consoles =
DSS/One-Touch key 200~259
The DSS keys 061~114 of all DSS consoles = No
Setting (SL1100)
Operation
To set up Tandem Ringing:
1. Press Speaker key at the extension considered to be the master telephone (optional).
2. Dial 744.
- OR -
Press the Tandem Ringing key (PRG 15-07 or SC 851 : 80).
3. Dial 1 to set the feature.
4. Enter the extension number to be considered the slave telephone (the telephone that rings when
the master extension rings).
A confirmation tone is heard (if the speaker was used).
SL1000/SL1100
ISSUE 2.0
1-676
Tandem Ringing
T