Guide to Feature Programming
Program
Number
Program Name Default Note
25-06-01 Next Attendant message number 0
11-10-20 VRS-Record / Erase message 716
20-17-01 Operator’s Extension number No setting
22-02-01 Incoming Service Type Setup 0
25-02-01 DID/DISA VRS Message 1
Operation
Set up Built-in Auto-Answering and Simple Voice Mail
< Program>
PRG 22-02-01: 1 (VRS)
PRG 25-02-01: Talkie type: 1 (VRS), Additional data: Message No. 1
PRG 25-06-01: Message No.1: 106 (record to VRS) Received dial 1
To record VRS prompt message 1
1. Press Speaker key +Dial 716+7+001 at terminal
2. After Beep tone, record your message.
3. Press Speaker key and finish recording.
Incoming call and record calling party message
1. Incoming call to specified trunk
2. Calling party is connected to built-in VRS, and hears auto-answering message 1.
3. Calling party dials 1.
4. Calling party records the message (max 2 minutes) after beep tone.
5. Finish the recording.
6. Then following notification will be indicated at operator Multiline Terminal LCD.
VOICE MESSAGE
xx MESSAGES
xx indicates number of recorded messages
(01ࠉ10)
To retrieve recorded message
1. Press Speaker key + dial 716 + 5 + message number (091~100) at terminal.
2. Recorded message is played.
To delete recorded message
1. Press Speaker key +dial 716 + 3 + message number (091~100) at terminal.
2. Recorded message is deleted.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-59
B
To Next Page
Loading...
