NEC SL1000 - Page 719

Guide to Feature Programming
Program Num-
ber
Program Name Default
10-19-01 VoIP DSP Resource Selection Resauce = 0
10-46-11 Multicast IP Address 224.0.0.10
10-46-12 Multicast Port 30000
11-12-19 Service Code Setup (for Service Access) - Internal Group
Paging
801
15-05-38 IP Telephone Terminal Basic Data Setup - Paging Proto-
col Mode
0
15-07-01 Programmable Function Keys Refer to Programmming Manual
20-06-01 Class of Service for Extensions All extension port = Class 1
20-13-29 Class of Service Options (Supplementary Service) - Pag-
ing Display
COS 01~15 = 1
31-01-01 System Options for Internal/External Paging - All Call
Paging Zone Name
GRP ALL (SL1000)
Group all (SL1100)
31-01-02 System Options for Internal/External Paging - Page An-
nouncement Duration
1200 (seconds)
31-02-01 Internal Paging Group Assignment - Internal Paging
Group Number
0 for IP Station 1 for TDM Station
All Stations = 0
31-02-02 Internal Paging Group Assignment - Internal All Call Pag-
ing Receiving
0 = Off
1 = On
All Stations = 0
31-03-01 Internal Paging Group Settings - Internal Paging Group
Name
Up to 12 Characters
01 = Group 1
02 = Group 2
:
32 = Group 32
31-07-01 Combined Paging Assignments 1
Operation
To make an Internal Page announcement:
Multiline Terminal/IP Terminal
1. Press the zone Internal Paging key (PRG 15-07 or SC 852: 21 + 0 or 1~9 or 01~32 for zones (0
or 00 for All Call).
- OR -
Press Speaker key or lift the handset. Dial 801 and the Paging Zone number (0~9 or 00~32).
Dialing 0 or 00 calls All Call Internal Paging.
- OR -
Dial
*
1 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
Display indicates the Combined Paging as an External Page.
If the Internal Page Zone is busy or if there are no extensions in a page group, the page is announced
as an External Page only.
2. Make announcement.
3. Press Speaker key to hang up.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-709
U