Related Features
Call Forwarding
Transfer
InMail
Voice Response System (VRS)
Guide to Feature Programming
The items highlighted in gray are read only and cannot be changed.
Program Num-
ber
Program Name Default
11-07-01 Department Group Pilot Numbers -Dial not assigned
15-07-01 Programmable Function Keys Refer to Programming Manual.
16-01-01 Department Group Basic Data Setup - Department Name not assigned
16-01-02 Department Group Basic Data Setup - Department Call-
ing Cycle
0
16-01-03 Department Group Basic Data Setup - Department Rout-
ing When Busy (Auto Step Call)
0
16-01-04 Department Group Basic Data Setup - Hunting Mode 0
16-01-05 Department Group Basic Data Setup - Extension Group
All Ring Mode Operation
0
16-01-06 Department Group Basic Data Setup - STG Withdraw
Mode
0
16-01-07 Department Group Basic Data Setup - Call Recall Restric-
tion for STG
0
16-01-09 Department Group Basic Data Setup - Department Hunt-
ing No Answer Time
15 (seconds)
16-01-10 Department Group Basic Data Setup - Enhanced Hunt
Type
0
16-02-01 Department Group Assignment for Extensions Refer to Programming Manual.
16-03-01 Secondary Department Group not assigned
20-06-01 Class of Service for Extensions All extension port = Class 1
20-09-07 Class of Service Options (Incoming Call Service) - Call
Queuing
COS 01~15 = 0
20-11-17 Class of Service Options (Hold/Transfer Service) - De-
partment Group Trunk-to-Trunk Transfer (Each Tele-
phone Group Transfer)
COS 01~15 = 1
20-13-06 Class of Service Options (Supplementary Service) - Au-
tomatic Off-Hook Signaling (Automatic Override)
COS 01~15 = 0
20-13-14 Class of Service Options (Supplementary Service) - De-
partment Calling (PLT No Called Extension)
COS 01~15 = 1
22-02-01 Incoming Call Trunk Setup 0
22-07-01 DIL Assignment not assigned
24-02-05 System Options for Transfer - Message Wait Ring Inter-
val Time
30 (seconds)
24-02-08 System Options for Transfer - Delayed Transfer Timer for
All Department Groups
10 (seconds)
SL1000/SL1100 ISSUE 2.0
1-714
Uniform Call Distribution (UCD)
U