Program
Number
Program Name Default Note
21-01-15 System Options for Outgoing Calls -
Outgoing Disable on Incoming Line (Toll
Restriction)
0
22-03-01 Trunk Ring Tone Range
Select the ring tone range for the trunk. The
trunk uses a ring tone in the range selected
when it rings an extension. Four ring tones
are available.
0 ~ 8
(Ring Tone Pattern 1 ~ 4)
(Melody 1 ~ Melody 5)
(default = 0)
(V2.0 Added)
23-04-01 Ringing Line Preference for Virtual Ex-
tensions
0
Operation
To answer a call ringing a Virtual Extension:
1. Press the flashing Virtual Extension key.
- OR -
Go off-hook.
PRG 20-10-08 needs to be set to on (1) for extension Class of Service.
To place a call to a Virtual Extension:
1. Go off-hook.
2. Dial the Virtual Extension, or press the Virtual Extension key.
The operation depends on the setting in PRG 15-02-21.
To place a call from a Virtual Extension:
1. Press the Virtual Extension key.
The operation depends on the setting in PRG 15-02-21.
2. Place an intercom call or dial a trunk access code to seize an outside line and place your call.
To program a Virtual Extension key on a telephone:
1. Press Speaker key.
2. Dial 852.
3. Press the key you want to program.
4. Dial
03.
5. Dial the number of the extension you want to appear on the key.
6. Press Hold key once for Immediate Ring (skip to step 8 for Delayed Ring).
SL1000/SL1100
ISSUE 2.0
1-720
Virtual Extensions
V
To Next Page
Loading...
