NEC SL1000 - Page 778

Single Line Terminals
Code Restriction/Toll Restriction
Guide to Feature Programming
Program Num-
ber
Program Name Default
14-01-17 Basic Trunk Data Setup - Trunk to Trunk Warning Tone for
Long Conversation Alarm
0
14-01-25 Basic Trunk Data Setup - Continued/Discontinued Trunk-to-
Trunk Conversation
0
20-06-01 Class of Service for Extensions All extension port = Class 1
20-13-01 Class of Service Options (Supplementary Service) - Long
Conversation Alarm
COS 01~15 = 1
20-21-01 System Options for Long Conversation - Long Conversation
Alarm 1
170 (seconds)
20-21-02 System Options for Long Conversation - Long Conversation
Alarm 2
180 (seconds)
20-28-01 Trunk to Trunk Conversation - Conversation Continue Code not assigned
20-28-02 Trunk to Trunk Conversation - Conversation Disconnect
Code
not assigned
20-28-03 Trunk to Trunk Conversation - Conversation Continue Time 0 (second)
21-01-01 System Options for Outgoing Calls - Seizure Trunk Line
Mode
0
21-01-03 System Options for Outgoing Calls - Trunk Interdigit Time
(External)
10 (seconds)
25-07-07 System Timers for VRS/DISA - Long Conversation Warning
Tone Time
30 (seconds)
25-07-08 System Timers for VRS/DISA - Long Conversation Discon-
nect Time
15 (seconds)
Operation
Warning Tone for Long Conversation is automatic if programmed.
Warning Tone for Long Conversation for DISA Callers:
1. A DISA caller dials into the system and places a call.
2. Once the Warning Tone is heard, To continue the call the DISA caller presses the programmed
Continue Code.
- OR -
To disconnect the call, the DISA caller presses the programmed Disconnect Code.
SL1000/SL1100
ISSUE 2.0
1-768
Warning Tone for Long Conversation
W