NEC SL1000 - Page 785

Dial this Service
Code. . .
1
When you . . . For this feature. . . Also see
Function
Key. . .
Note
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle Speaker key first).
862 Pick up a call from Group Hold. Hold -
863 Join a Meet Me Conference or
Meet Me Page on an Internal
Paging Zone (if your extension is
in the group called).
Meet Me Conference Meet Me
Paging
23 or 32
864 + zone paged
(0~32)
Join a Meet Me Conference or
Meet Me Page if your extension
is not in the group paged.
Meet Me Paging 23 or 32
865 + zone (0~3) Join a Meet Me Conference or
Meet Me Page on an External
Paging Zone.
Meet Me Conference Meet Me
Paging
23 or 32
868 + pickup group
(1~8 or 1~9 or 01~64)
Answer a call ringing a tele-
phone in another pickup group
(except Ring Group calls).
Group Call Pickup 26 + group
869 Answer a call ringing a tele-
phone in another pickup group if
you do not know the group num-
ber (except Ring Group Calls).
Group Call Pickup 25
870 Cancel a Callback request. Callback -
871 + ext Cancel Messages Waiting you
left at a specific extension.
Message Waiting -
873 Cancel all Messages Waiting
you have left at other exten-
sions.
Message Waiting -
875 + pswd (0000) +
place outside call
Temporarily override anexten-
sion Toll Restriction.
Toll Restriction Override -
876 Clear number saved by Last
Number Redial.
Last Number Redial -
881 + 00 (no tone),
01(general) or 02
(holiday)
Change the Music on Hold
Tone.
Music on Hold -
882 Route ANI/DNIS to the VRS. It
can also be used to transfer to
VRS.
Transfer Voice Response
Service (VRS)
-
883 Enable the data communication
auto-answer mode.
Data Communications -
885 Clear the number saved by Save
Number Redial.
Save Number Redial -
791 Use Voice Over after calling a
busy extension.
Voice Over 48 (SL1100)
894 Split between two calls on a
SLT.
Call Waiting -
899 Test Callback operation for a
SLT.
Callback -
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 2-7