For this fea-
ture...
Dial this Service Code...
1
When you ... Also see
Function
Key...
Note
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker
key first).
Transfer 833 Set the Automatic Transfer for each
trunk line.
-
834 Cancel the Automatic Transfer for
each trunk line.
-
835 Set the Destination for Automatic
Trunk Transfer.
-
702 + Group number (1~8 or 01~32) Set Automatic Transfer Setup for
each extension group.
-
703 + Group number (1~8 or 01~32) Cancel Automatic Transfer Setup -
704 + Group number (1~8 or 01~32) +
mode + extension
Set the destination for Automatic
Transfer Setup for each extension
group.
-
705 + Group number (1~8 or 01~32) Set Delayed Transfer for each ex-
tension group.
-
706 + Group number (1~8 or 01~32) Cancel Delayed Transfer. -
707 + Group number (1~8 or 01~32) Set up DND for each extension
group.
-
708 + Group number (1~8 or 01~32) Cancel DND for each extension
group.
-
884 + Extension number Transfer a call into an existing call. -
882 Transfer a call to the VRS. This can
be used also to route ANI/DNIS to
the VRS.
-
Trunk Group Rout-
ing or Automatic
Route Selection
0 Place a call using Trunk Group
Routing or Automatic Route Selec-
tion.
02
Trunk Queuing
8 Call your mailbox. -
754 Enable Conversation Record at an
SLT.
-
# (Off-Hook) Camp on to or leave a Callback at a
busy trunk.
35
Voice Mail 5
(Off-Hook)
Leave a message in a co-worker’s
mailbox after callback their busy or
unanswered extension.
-
8 Call your mailbox. -
754 Enable Conversation Record at an
SLT.
-
Voice Over 6 (Off-Hook) Send a Voice Over to a busy exten-
sion after hearing Busy/Ring tone.
48 (SL1100)
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 2-13
To Next Page
Loading...
