To program a key, press Speaker key, dial 851 (for 3-digit code) or 852 (for 2-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
For this
feature...
Use this key... When you ... Key Lamp Status Also See Srvc
Code
Note
Call For-
warding,
Both Ring
Code: 14
Operation: Press key +
Dest. Extension
Call Forward Both
Ring to extension.
Slowly flashes red 842
Call For-
warding,
Busy
Code: 11
Operation: Press key +
Dest. Extension
Call Forward Busy to
extension or Voice
Mail.
Slowly flashes red #1
Call For-
warding,
Busy/No
Answer
Code: 13
Operation: Press key +
Dest. Extension
Call Forward Busy/No
Answer to extension
or Voice Mail.
Slowly flashes red 844
Call For-
warding,
External by
Door Box
Code: 54
Operation: Press key +
Dest. Number
Externally Call For-
ward Door Box calls.
Slowly flashes red 822
Call For-
warding,
Follow Me
Code: 15
Operation: Press key +
Dest. Extension
Call Forward Follow
Me to extension or
Voice Mail.
Slowly flashes red 846
Call For-
warding,
Immediate
Code: 10
Operation: Press key +
Dest. Extension
Call Forward Immedi-
ate to extension or
Voice Mail.
Slowly flashes red 848
Call For-
warding, No
Answer
Code: 12
Operation: Press key +
Dest. Extension
Call Forward No An-
swer to extension or
Voice Mail.
Slowly flashes red 845
Call For-
warding /
Do Not Dis-
turb Over-
ride
Code: 37
Operation: Call extension
+ Press key
Override an extension
Call Forwarding or Do
Not Disturb.
None -
Callback /
Camp-On/
Trunk
Queuing
Code: 35
Operation: Call busy ex-
tension or access busy
trunk + Press key
Leave a Call back re-
quest at a busy exten-
sion, Camp On to a
busy extension, or
Queue for a busy
trunk.
On red when activa-
ted
#
Call Redi-
rect
Code: 49 + extension or
voice mail
Operation: Press key
Redirect a ringing call
to the predefined des-
tination.
On red when activa-
ted
-
Central Of-
fice Calls
Code:
01 + Trunk num-
ber (001~126 (SL1000)
001~088 (SL1100))
Operation: Press key
Press a line key to
place or answer a
trunk call (where
trunks are 001~126
(SL1000) 001~088
(SL1100)).
On green when
seized, on red when
in use (by other par-
ty), Slow Flash green
when ringing, Hold
key flash when on
Hold
#0
Conference Code: 07
Operation: Set up call +
Press key + set up call to
add + Press key twice
Set up a Conference
or a Meet Me Confer-
ence.
On red during setup 826
Department
Calling
Code: 46
Operation: Press Key
Log in or log out of
your Department Call-
ing Group.
On when removed,
Off when installed
750
Department
Step Calling
Code: 36
Operation: Dial busy ext +
Press key
Step Call through a
Department Group for
an idle member.
None 4
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 2-15
To Next Page
Loading...
