NEC SL1000 - Page 92

5. Dial Trunk Access Code (default: 9) + number (9 + 2142622000).
Trunk access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group (1 ~ 9, 01 ~ 99 or 001 ~
100) or #0 + Line number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.
To cancel Call Forwarding Off-Premise Split:
1. At the Multiline Terminal, press Speaker key.
- OR -
At a Single Line Terminal, lift the handset.
2. Dial the Call Forward Access Code (default not assigned).
3. Dial 0 (Cancel).
If Internal and External are set both are canceled.
Your DND or Call Forwarding (Device) Programmable Function key flashes.
Off-Premise Call Forwarding for Door Boxes
These operations are performed at the Door Box Ringing Extension only.
To activate Call Forwarding for a Door Box:
This option only works for ISDN PRI or BRI Trunks.
1. At the Multiline Terminal, press Speaker key + dial SC 822.
- OR -
At the Multiline Terminal only, press the Call Forward (Device) key (PRG 15-07-01 or SC 851,
code 54).
- OR -
At the Single Line Terminal, lift the handset + dial 822.
2. Dial the Door Box number (1 ~ 8).
3. Dial the Speed Dialing number where the calls should be forwarded.
4. Press Speaker key (or hang up at the Single Line Terminal) to hang up.
To cancel Call Forwarding Off-Premise for a Door Box:
1. At the Multiline Terminal, press Speaker key + dial SC 822.
- OR -
At the Multiline Terminal only, press the Call Forward (Device) key (PRG 15-07-01 or SC 851,
code 54).
- OR -
At the Single Line Terminal, lift the handset + dial 822.
2. Dial 0 (Cancel).
Trunk-to-Trunk Forwarding
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 835.
SL1000/SL1100
ISSUE 2.0
1-82
Call Forwarding, Off-Premise
C