NEC US40a - Time Synchronization

104 Using Advanced Features
Time Synchronization
To connect US40a to the Internet time server to synchronize the time, follow the steps below:
1. Select [Start] → [Control Panel] → [Date and Time] and activate [Date and Time
Properties].
2. Select the [Internet Time] tab, provide settings as described below, and click [OK].
This enables US40a to connect to the Internet time server and make the system time
synchronized with the Internet time.
Internet Time
 [Automatically synchronize with an Internet time server] checkbox
Check this checkbox to synchronize US40a with the Internet time server automatically.
 [Server:]
Enter the name of the Internet time server used for the time synchronization.
 [Update Now] button
Immediately accesses to the Internet time server to set the time.