NEC US40a - Starting

About US40a 33
Starting
The NEC logo appears on the display screen after US40 is powered on. When you press F2 in the
status, SETUP is started to display the main menu screen.
If a password is specified in a previous SETUP activation, the dialog box requiring you to enter the
password appears as follows. Enter the password.
Enter CURRENT password [ ]
You can enter the password for up to three times. If you enter the password incorrectly three times,
US40a will be halted (any further operations are disabled). Turn off the power of US40a.
NOTE: There are two types of passwords, or supervisor and user
passwords. The supervisor password allows you to check or modify all
settings of the SETUP. For the user password, some settings of the
SETUP are prohibited from being checked or modified.