NEC US40a - Update

78 Using Features of US40a
Update
You can install the update modules of programs as application software released from NEC for
US40a.
Update
The [Update] includes the following features:
 Update setting
Allows you to configure whether to do automatic update or not and configure the
download server from where update files are obtained.
 Manual update
Click [Update] on the Update dialog box to start the update.
 Auto update
Checks download servers on US40a booting to obtain files subject to update if any and
update them automatically. The auto update takes place if you check [Automatically
update on booting] on the [Update Settings] dialog box.
 Process status indication
The process status is shown once the update gets started and after the completion of the
update process, a message containing the process result is shown.