NEC US40a - Network Utilities

Using Features of US40a 75
Network Utilities
The [Network Utilities] can be used to check network connection. You can use the Ping, Ipconfig,
and netstat commands to check the network connection.
Network Utilities
Run any of the commands Ping, Ipconfig and netstat used to check the network status.
Select a command and click the [Run] button. Then the selected command is executed.
 Command
Select the command to be executed out of Ping, Ipconfig and netstat.
The default command is Ping.
 Command parameters
Enter the parameters specified for the selected command.
A command parameter can be up to 256 characters.
 [Help] button
Select [Help] to display the help of the selected command.
 [Run] button
Select [Run] to run the selected command.
 [Close] button
Select [Close] to exit from the Network Utility.