NEC US40a - Connections

About US40a 29
Connections
This section describes the procedure of connecting cables and a power cord to US40a.
WARNING
Observe the following instructions to use US40a safely. Failure to follow these
instructions may result in death or serious personal injury. See pages iv to xi for
details.
■ Do not hold the power plug with a wet hand.
CAUTION
Observe the following instructions to use US40a safely. Failure to follow these
instructions may cause a fire, personal injury, or property damage. See pages iv to
xi for details.
■ Plug into a proper power source of the specified voltage.
■ Do not connect exceeding number of power cords to a power outlet to prevent
excessive electrical load.
■ Do not use US40a with any loose interface connection.
■ Use the authorized power cord only.
■ Do not connect any interface cable with the power cord of US40a being
connected to a power source.
■ Do not use any unauthorized interface cable.
1. Connect a network cable to the LAN connector on US40a.
2. Connect USB cables to the USB ports on US40a.
3. Connect the power cord to the AC adapter.