36 About US40a
The items which can be set on the Main menu screen and their functions are described below.
Item Parameter Description
System Time HH:MM Set the time.
System Date AAA YY/MM/DD Set the date. AAA indicates the day of the week.
Memory Information – Check the memory information.
IMPORTANT: Be sure to confirm that the date and time is set
appropriately with the relevant BIOS parameters. Check and adjust the
system clock before operation of US40a in any of the following
conditions:
After transportation of US40a
After storage of US40a
After US40a is entered into the suspended state under the
environmental condition apart from the range in which the operation
of US40a is secured (temperature: 10ºC - 35 ºC and humidity: 20% -
80%)
Check the system clock about once per month. It is recommended that,
if the system requires high time precision, a proper time server (NTP
server) is used to meet the requirement.
If the system time is delayed or advanced remarkably as time passes in
spite of adjustment, contact your service representative to ask
maintenance.
Memory Information
Selecting [Memory Information] on the Main menu allows you to check the memory information.
To Next Page
Loading...
