Neoway N11 V2 - Closing HTTPS Link (+HTTPSCLOSE)

N11 V2
AT Command Manual
Copyright © Neoway Technology Co., Ltd
97
+HTTPSCLOSED: HTTPS Link Closed
the connection.
Remarks
 Custom packets must comply with the HTTP protocol.
 Different status codes might be returned after sending the request.
14.4 Closing HTTPS Link: +HTTPSCLOSE
Description
To close an HTTPS link
Format
AT+HTTPSCLOSE<CR>
Parameter
N/A
Return Value
See the Example
Example
AT+HTTPSCLOSE
OK
Close an HTTPS link.
Remarks
After +HTTPSCLOSE is executed, the HTTPS link is closed but the parameters
set by +HTTPSPARA will be reserved.
14.5 HTTPS Link Closed Report: +HTTPSCLOSED
Description
Unsolicited report that an HTTPS link is closed
Format
<CR><LF>+HTTPSCLOSED: HTTPS Link Closed<CR><LF>
Parameter
N/A
Return Value
See the Example
Example
+HTTPSCLOSED: HTTPS Link Closed
Unsolicited report that the HTTPS
link is closed
Remarks
N/A