Neoway N11 V2 User Manual

N11 V2
AT Command Manual
Copyright © Neoway Technology Co., Ltd
13
terminal display is disabled automatically.
 ATE is equal to ATE1.
2.5 Setting the Code Result Suppression Mode: ATQ
Description
To set the mode whether to suppress the code result
Format
ATQ[<value>]<CR>
Parameter
<value>: 0, 1
0: Output the code result (default)
1: Suppress the code result
Return Value
See the Example.
Example
ATQ1
AT+CSQ
+CSQ: 31, 99
Set to code result suppress mode. (The module does not
return OK after this command is executed successfully.)
After the mode is set, the return value for the AT+CSQ
command does not contain the code result OK.
ATQ0
OK
AT
OK
Set to the code result output mode.
After the mode is set, the return value for the AT command
contains the code result OK.
Remarks
 After mode set to the code result suppression mode, the module does not
output OK or ERROR to commands.
 The setting by this command cannot be saved after the module is powered off.
The setting is valid only for the GSM commands and invalid for customized
commands.
 ATQ is equal to ATQ1.
2.6 Setting the Response Format of the Device: ATV
Description
To set the response format of the device
Format
ATV[<value>]<CR>
Parameter
<value>: 0, 1

Neoway N11 V2 Specifications

General

Brand	Neoway
Model	N11 V2
Category	Control Unit
Language	English