Neoway N11 V2 User Manual

N11 V2
AT Command Manual
Copyright © Neoway Technology Co., Ltd
20
2.13 Setting the Baud rate of the Module: +IPR
Description
To set the baud rate of the module
Format
 AT+IPR=<baud rate><CR>
 AT+IPR?<CR>
 AT+IPR=?<CR>
Parameter
<baud rate>: 0, 9600, 19200, 38400, 57600, 115200
Return Value
See the Example.
Example
AT+IPR=115200
OK
Set the baud rate of the module to
115200.
AT+IPR=100
ERROR
Set the baud rate to 100 that is not a
valid value. ERROR is returned.
AT+IPR?
+IPR: 115200
OK
Query the current baud rate of the
module.
AT+IPR=?
+IPR: 0, 9600,19200,38400,57600,115200
OK
Query the valid baud rate range of
the module.
Remarks
 The default baud rate is 115200.
 The settings by this command will be saved after the module is powered off.
2.14 Entering the PIN Codes: +CPIN
Description
To query the PIN status and enter the PIN codes
Format
 AT+CPIN=<pin>[,<newpin>]<CR>
 AT+CPIN=<PUK>,<PIN><CR>
 AT+CPIN?<CR>
Parameter
<pin>, <newpin>:string type with a pair of quotation marks ("")
<PUK>: PUK code of the SIM card
<PIN>: PIN code of the SIM card
Return Value
<CR><LF>+CPIN:<code>

Neoway N11 V2 Specifications

General

Brand	Neoway
Model	N11 V2
Category	Control Unit
Language	English