Neoway N11 V2 User Manual

N11 V2
AT Command Manual
Copyright © Neoway Technology Co., Ltd
30
AT+CGDCONT=1,IP,CMNET
ERROR
The parameter format is incorrect
(lack of quotation marks).
ERROR is returned.
AT+CGDCONT?
+CGDCONT: 1,"IP","CMNET","0.0.0.0",0,0
OK
Query the current parameter value.
AT+CGDCONT=?
+CGDCONT: (1),"IP",,,(0),(0)
OK
Query the value range of parameters.
Remarks
Only one APN can be set.
4.2 Sending USSD Data: +CUSD
Description
To send Unstructured Supplementary Service Data (USSD)
Format
 AT+CUSD=<n>,<str>,<dcs><CR>
 AT+CUSD?<CR>
 AT+CUSD=?<CR>
Parameter
<n>:
0: Do not display the return code
1: Display the return code
2: Cancel the request
<str>: USSD string
<dcs>: 3GPP TS 23.038 [25] Cell Broadcast Data Coding Scheme in integer format
(default 15)
<m>:
0: no further user action required
1: further user action required
2: USSD terminated by network
3: other local client has responded
4: operation not supported
5: network response times out
Return Value
See the example.
Example
AT+CUSD=1,"*100#",15
The operator supports this

Neoway N11 V2 Specifications

General

Brand	Neoway
Model	N11 V2
Category	Control Unit
Language	English