Neoway N11 V2 - Setting the te Character Set: +CSCS; Setting the SMS Indication Mode: +CNMI

N11 V2
AT Command Manual
Copyright © Neoway Technology Co., Ltd
38
5.3 Setting the TE Character Set: +CSCS
Description
To set the format of the TE character set
Format
 AT+CSCS=[<chest>]<CR>
 AT+CSCS?<CR>
 AT+CSCS=?<CR>
Parameter
< chset >:
 "GSM": Default GSM alphabet (GSM03.38.6.2.1)
 "HEX": Character string consisting of hexadecimal numbers from 0x00 to
0xFF. For example, "032FE6", equal to three 8-bit characters, whose values
are respectively 3, 47, and 230 in decimal system. These characters do not
have to be converted with the source MT character set.
 "PCCP936": PC Set Chinese character
 "UCS2": 16-bit universal multiple-octet coded character set (USO/IEC10646).
The UCS2 character string is converted into a hexadecimal number (ranging
from 0x0000 to 0xFFFF). UCS2 encoding is used only in some character string
of the statement.
Return Value
See the Example
Example
AT+CSCS="HEX"
OK
Set HEX character set.
AT+CSCS?
+CSCS: "HEX"
OK
Query the format of current
character set.
AT+CSCS=?
+CSCS: ("GSM","HEX","PCCP936","UCS2")
OK
Query the character set formats
that the module supports.
The list of the character set
formats is returned.
Remark
N/A
5.4 Setting the SMS Indication Mode: +CNMI
Description
To set the mode how the module informs users of new SMS messages received
from the network
Format
 AT+CNMI=[<mode>[,<mt>[,<bm>[,<ds>[,<bfr>]]]]]<CR>