Neoway N11 V2 - Reading Phonebook Entries (+CPBR)

N11 V2
AT Command Manual
Copyright © Neoway Technology Co., Ltd
54
OK
Remarks
N/A
6.2 Reading the Phonebook: +CPBR
Description
To read the phonebook information
Format
 AT+CPBR=<index1>[,<index2>]<CR>
 AT+CPBR=?<CR>
Parameter
<index1>: Integer type, the sequence number of the phone number
<index2>: Integer type, the sequence number of the phone number
Return Value
[+CPBR:<index1>,<number>,<type>,<text><CR>
+CPBR:<index2>,<number>,<type>,<text>]
[+CPBR:<index1>,<number>,<type>,<text>[,<hidden>][[...]
<CR><LF>
+CPBR:<index2>,<number>,<type>,<text>[,<hidden>]]]
<index1>, <index2>, <index>:Integer type values in the range of location numbers
of phonebook memory
<number>:String type phone numberof the format <type>
<type>:Type of address octet in integer format (refer TS 24.008 [8] subclause
10.5.4.7)
<text>:The phonebook entry name, string type field of maximum length<tlength>;
character set as specified by command Select TE Character Set +CSCS
+CPBR:(list of supported <index>s),[<nlength>],[<tlength>]
<nlength>:Integer type value, indicating the maximum length of field <number>
<tlength>:Integer type value indicating the maximum length of field <text>
<hidden>: indicates if the entry is hidden or not
0: phonebook entry, not hidden
1: phonebook entry, hidden
Example
AT+CPBR=1,3
+CPBR:1, "091137880", 129, "Comneon"
+CPBR:2, "09113788223", 129, "MMI"
+CPBR:3, "09113788328", 129, "Test-ro"
OK
Read the phone numbers from 1 to
3 in the phonebook.