Neoway N11 V2 - Ping Function (+PING)

N11 V2
AT Command Manual
Copyright © Neoway Technology Co., Ltd
118
name with or without quotation marks)
Return Value
See the Example
Example
AT+PING=www.baidu.com
OK
Reply from 183.232.231.172: bytes= 36 time =
780(ms), TTL = 255
Reply from 183.232.231.172: bytes= 36 time =
299(ms), TTL = 255
Reply from 183.232.231.172: bytes= 36 time =
719(ms), TTL = 255
Reply from 183.232.231.172: bytes= 36 time =
755(ms), TTL = 255
Reply from 183.232.231.172: bytes= 36 time =
299(ms), TTL = 255
Ping statistics for 183.232.231.172
Packets: Sent = 5, Received = 5, Lose = 0 <0%>,
max_delay = 780 ms, min_delay = 299 ms, average
delay = 570 ms
PINGwww.baidu.com
Send 4 request data
packets (12 bytes)
continuously.
Receive 4 response
packets (32 bytes).
AT+PING=192.168.2.61
OK
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.2.61:
Packets: Sent = 4, Received = 0, Lose = 4 <100% loss>
PING 192.168.2.61
Send 4 request data
packets (12 bytes)
continuously.
Receive 0 response
packets because of
timeout.
AT+PING=www.baidu.com
+PING: No PPP Link
No PPP connection is set
up.
Remarks
A PPP connection must be set up before using this command.