Text mode (+ CMGF = 1)
The command is executed successfully and the command is SMS-DELIVER:
+
CMGR:
<stat>,<oa>,[<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,
<tosca>,<length>]<CR><LF><data>
The command is executed successfully and the command is SMS-SUBMIT:
+
CMGR:
<stat>,<da>,[<alpha>][,<toda>,<fo>,<pid>,<dcs>,[<vp>],<sca>,
<tosca>,<length>]<CR><LF><data>
The command is executed successfully and the command belongs to SMS-
STATUS-REPORT:
+ CMGR: <stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
The command is executed successfully and the command is SMS-
COMMAND:
+CMGR:
<stat>,<fo>,<ct>[,<pid>,[<mn>],[<da>],[<toda>],<length><CR><LF><cdata>]
The command is executed successfully and the command supports CBM
storage:
+ CMGR: <stat>,<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
Stat:
"REC UNREAD" Received unread message
"REC READ" Received messages have been read
"STO UNSENT" Stored unsent messages
"STO SENT" Stored messages have been sent
PDU mode (+ CMGF = 0) and the command is executed successfully:
+ CMGR: <stat>, [<alpha>], <length><CR><LF><pdu>
Stat:
0 Unread message received
1 The read message has been received
2 Unsent messages have been stored
3 Sent messages have been stored
Alpha: The number of characters to represent
Length: The number of octets of the given TP-level data unit (octets that do not
contain the service center address)
pdu: PDU data
To Next Page
Loading...
Need help?
General
