The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4.
Select Configure > Network Profiles.
The Network Profiles page displays.
5.
In the Configured Profiles table, to the right of the network profile that you want to
change, click the 3 dots icon and select Edit.
The Edit Profile window displays.
6. Change the settings as needed.
For more information about the settings, Use an AV profile template to configure
and assign a network profile on page 19.
You cannot change the VLAN ID and AV profile template selection.
7. Click the Apply button.
Your settings are saved. The window closes. The Network Profiles page displays
again.
8.
To save the settings to the running configuration, at the top of the page, click the
Save icon or text.
Remove a network profile
You can remove an existing network profile that you no longer need.
To remove a network profile:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3.
In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4.
Select Configure > Network Profiles.
The Network Profiles page displays.
5.
In the Configured Profiles table, to the right of the network profile that you want to
remove, click the 3 dots icon and select Delete.
Audio Video User Manual22Audio-Video Profile Templates
and Network Profiles
AV Line of Fully Managed Switches M4250 Series
To Next Page
Loading...
Need help?
General
