Note: The idle time-out period for an AV UI session is five minutes. However, if you
are automatically logged out of the AV UI and then log in again, the running configuration
is not lost and you can save it to the startup configuration.
To save the running configuration to the startup configuration:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3.
In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4.
At the top of the page, click the Save icon or text.
The running configuration is saved to the startup configuration.
Download the running configuration
You can download the running configuration (that is, the current configuration) to a
computer. If you do so, you can restore both the running configuration and startup
configuration from your saved configuration file.
To download the running configuration:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3.
In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4.
Select Configure > Maintenance.
The Maintenance page displays.
5.
In the Configuration Management section, click the Download Configuration button.
A pop-up window displays.
6.
Navigate to a location on your computer and save the text file.
Audio Video User Manual74Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
To Next Page
Loading...
Need help?
General
