The Overview page displays.
4.
In the Device Details section, below the Date & Time field, click the pencil icon.
The Time Configuration window displays.
5. Turn on the Enable SNTP toggle so that it displays green and is positioned to the
right.
6. From the Time Zone menu, select the time zone in which the switch operates.
7. In the SNTP Server Address 1, SNTP Server Address 2, and SNTP Server Address 3
fields, enter the domain name or IP address for an SNTP server.
By default, the SNTP Server Address 1 field contains the NETGEAR SNTP server
(time-a.netgear.com), but you can replace that SNTP server with another one.
Configuring the additional two SNTP servers is optional.
8. Click the Apply button.
Your settings are saved. The window closes. The Overview page displays again.
9.
To save the settings to the running configuration, at the top of the page, click the
Save icon or text.
Add a system name
You can add a system name, which allows you and others to identify the switch in the
network. By default, no system name is configured.
To add a system name:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3.
In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4.
In the Device Details section, below the System Name field, click the pencil icon.
The Edit System Name window displays.
5.
In the New System Name field, specify a system name.
6. Click the Apply button.
Audio Video User Manual77Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
To Next Page
Loading...
Need help?
General
